DA47 : CompletePower™ Motion Control
Technology: PMDC Servo-PWM
Quadrants: 4
Continuous Current: 9A and 18A
For Brush-Commutated PMDC Motors. Up to 1260 W.
This servo-amplifier is built into a fully enclosed rugged aluminum case. Mode of operation is set by simple DIP switches. This drive handles a wide range of power supply voltages (from 11 to 70VDC) for a variety of power input requirements. Inputs include current limit, set value input, enable, tach and a ramp function. The drive handles continuous currents up to 9 and 18A. The pulse-width modulated power stage utilizes 95% efficient MOSFET-technology and is protected against over-current and over-temperature.
DA47 Specifications
| Model Numbers | Power Supply Voltage (VDC) | Aux Voltage (VDC) | Continuous Current (Amps) | Peak Current (Amps) | Max Power with Heatsink (Watts) | Frequency of Power Output Stage (kHz) | Efficiency (%) |
|---|---|---|---|---|---|---|---|
| DA4709 | 11 - 70 | 5 - 24 | 9 | 18 | 630 | 50 | 95 |
| DA4718 | 11 - 70 | 5 - 24 | 18 | 36 | 1260 | 50 | 95 |
| Control Inputs | |
|---|---|
| Set Value (VDC) | ±10V |
| Tach (VDC) | ±10V |
| Enable | TTL/24V |
| Ramp | TTL/24V |
| Imax (VDC) | 0 to 10 |
| Features Selected by Dip Switches | |
| Vmode, IxR-mode, I-mode | Not set/set |
| Imax | ext/int |
| Set value via Offset | offset/ext |
| Ipeak | on/off |
| Outputs | |
| Auxillary Voltage Sources | 5V/50mA |
| Auxillary Voltage Sources | 10 VDC/20mA |
| Monitor I | 0.5V/1A |
| Monitor n | .1V/1Vmotor |
| Error | open collector / push pull / TTL / 24V |
| Display | |
| LEDs | green = power / red = error |
| Potentiometers | |
| Function of Potentiometers | offset / nmax / gain / IxR / Imax |
| Mechanical Specs | |
| Dimensions (L x W x H in mm) | 119 X 85 X 27.5 |
| Mounting Hole Distance (mm) | 112 X 50 |
| Weight (grams) | 220 |
| Operating Temperature (°C) | -10 to +45 |
| Storage Temperature (°C) | -40 to +85 |
| Humidity Range Not Condensing (%rel) | 20 to 80% rel. |
| Operation Mode | |
| Operation Mode | speed-control by Voltage speed-control by DC-tach torque control IxR-compensation |
DA47 Technical Drawings
DA47 Accessories
| Photo | Model Number | Description | Technical Drawing |
|---|---|---|---|
 |
ASO- BM- 70- 30 | Breaking module for DA and EA-Series. | Download PDF |
 |
CAxxxx | RoHS-compliant CAT5E FTP-Patch-Cable with RJ45 connectors at both ends. Styles available: - Red 50cm [model: CA2005] - Red 100cm [model: CA2010] - Red 200cm [model: CA2020] - Red 300cm [model: CA2030] - Yellow 50cm [model: CA4005] - Yellow 100cm [model: CA4010] - Yellow 200cm [model: CA4020] - Yellow 300cm [model: CA4030] - Gray 50cm [model: CA8005] - Gray 100cm [model: CA8010] - Gray 200cm [model: CA8020] - Gray 300cm [model: CA8030] |
Download PDF |
 |
HA3008 | Passive heatsink optimized for SA45, EA27, EA47 and DA47 drives. | Download PDF |
 |
HA3018 | One fan heatsink optimized for SA45, EA27, EA47 and DA47 drives. Fan is 1 x 24VDC, .8W. | Download PDF |
 |
HA3028 | Two fan heatsink optimized for SA45, EA27, EA47 and DA47 drives. Fans are 2 x 24VDC, .8W. | Download PDF |
 |
MA2005 | Din Rail Mounting Kit for DA and EA-Series. | Download PDF |
|
MA3050 | Din Rail Mounting Kit for WA2509 Break out board. | Download PDF |
 |
WA2509 | Break out board for DA, EA and SA-Series. | Download PDF |